Ethernet :: AR8328 AR8328N
Atheros ETHOS® technologies provide customers with industry-leading low power and solution size to enable Fast or Gigabit Ethernet connectivity in networking equipment, consumer electronics and computing platforms. Our PHY, controller and switch solutions support the IEEE 802.3az standard for Energy Efficient Ethernet, to extend battery-charges on computing platforms and deliver power-efficiencies in networking equipment. Atheros also enables incremental power-saving techniques to offer our customers the very lowest power Ethernet in the industry today. The unmatched efficiency and advanced carrier-class features of Atheros ETHOS solutions give customers a competitive edge when designing products for energy-conscious consumers and businesses.
AR8328 Product Overview
The AR8328 is the latest in high performance small network switching. It is ultra low power, has extensive routing and data management functions and includes hardware NAT functionality (AR8328N).
The AR8328/AR8328N is a highly integrated seven-port Gigabit Ethernet switch with a fully non-blocking switch fabric, a high-performance lookup unit supporting 2048 MAC addresses, and a four-traffic class Quality of Service (QoS) engine. The AR8328 has the flexibility to support various networking applica- tions. The AR8328/AR8328N is designed for cost-sensitive switch applications in wireless AP routers, home gateways, and xDSL/cable modem platforms.
The AR8328/AR8328N complies with 10Base-T, 100Base-T and 1000Base-T specifications, including the MAC control, pause frame, and auto-negotiation, providing compatibility with all industry-standard Fast Ethernet and Gigabit Ethernet networks. The AR8328/AR8328N device contains five full-duplex 10/100/100Base-T transceivers and 10/100BaseT that can run at half duplex, each of which performs all of the physical layer interface functions for 10Base-T Ethernet on Category 3, 4, or 5 unshielded twisted-pair (UTP) cable and 100Base-T Fast/Gigabit Ethernet on Category 5 UTP cable. The remaining 2 ports feature a standard GMII/RGMII/MII/Serdes interface to allow connection to a host CPU in PON/xDSL/Cable/Wi-Fi/Fiber routers.
The MACs on the AR8328/AR8328N support Jumbo Frames to reduce overhead on the link for more efficiency. SPI or EEPROM interfaces provide easy program- ming of the on-chip 802.1p QoS and/or DiffServ/TOS allowing switch traffic to be given different classes of priority or service – for example, voice traffic for IP phone applications, video traffic for multimedia applications, or data traffic. Up to 4k virtual LANs (VLANs) can be set up via the SPI port for separation of different users or groups on the network. ACL features can reduce CPU effort for VLAN/QOS/DSCP/forward mapping and remapping based on Layer1 to Layer4 information. 16 PPPoE header add/removal can increase video quality and offload the CPU. Hardware IGMP V1/V2/V3 is an innovation for IPTV service. Atheros low-power can increase energy efficiency for no link or idle states.
The AR8328N supports line rate NAT (Network Address Translation) offloading the processor and improving throughput.
- Supports GMII/RGMII with up to three ports
- Single SERDES/SGMII Interface
- 5 integrated 10/100/1000Base-T PHYs with integrated termination for the MDI interface
- Supports IEEE 802.3az standard
- Atheros ETHOS-Designed Green Ethernet (EDGE™) power saving modes
- QoS support with four traffic classes based on port, IEE802.1p, IPV4 TOS, IPV6 TC and MAC addresses
- Full VLAN support including QinQ and VLAN tag insertion and removal, with IVL and SVL
- VLAN translation and mapping
- Line rate hardware NAT (AR8328N)
- Hardware IGMP V1/2/3 and MLD V1/2 snooping, join and fast leave
- 96 Custom ACLs and rule based counters
- Ingress and Egress rate limiting and bandwidth control
- Broadcast storm suppression